How to Build a Lego Minecraft Inventory Crafting Table
Build a functioning Lego Minecraft crafting table featuring an opening inventory interface and textured wooden side panels using standard Lego bricks and tiles.
This guide shows how to build a lego minecraft inventory crafting table in 20-30 minutes. Start with construct the base foundation; follow the safety notes and step checkpoints below.
Visual step map
See the full sequence before you start, then check off each step as you go.
0 of 5 steps checked
Materials and cost planner
Select the items you plan to buy, adjust any estimated price, and calculate the selected total.
Editable rough U.S. retail estimates. Estimated all listed: $85.00. Prices are planning estimates, not quotes — tax, store, brand, size and quantity will change them.
Time and finish planner
Estimate active working time from the number of steps in this guide.
Canvas and image ratio calculator
Resize a canvas or pattern while preserving its original proportions.
Use this for proportional scaling only. Cropping, matting and frame sizes may require a different ratio.
- Read the tools, materials, safety notes, and steps below for free.
- Tap See 20-second demo if you want to understand it first.
- Tap Start Camera Coach when you want hands-free help, or Voice-only if you do not want to use the camera.
- Allow camera and microphone. Point your phone at the work; the coach watches your progress and tells you the next step.
🧰 Required Tools & Equipment
- ✓ Lego brick separator
- ✓ Part sorting tray
- ✓ Flat building surface
📦 Materials & Supplies
- ✓ Reddish-brown Lego plates and bricks (assorted sizes)
- ✓ Tan and dark brown 1x1 and 1x2 tiles
- ✓ Light bluish gray 1x1 and 2x2 tiles
- ✓ 1x2 or 1x4 smooth slide rail / groove bricks
- ✓ Assorted jumper plates and modified hinge plates
⚠️ Safety Checkpoints & Warnings
- • Keep small Lego elements away from toddlers and pets to prevent choking hazards.
- • Use a plastic brick separator instead of teeth or fingernails to pry apart stuck pieces.
📋 Step-by-Step Guide (5 Steps)
Construct the Base Foundation
Snap together reddish-brown plates to form a square base footprint, typically 6x6 or 8x8 studs wide. Reinforce the bottom layer with cross-lapping 2x4 plates so the base does not flex under downward pressure. Lay down smooth slide-groove bricks or tiles along the bottom interior to guide the sliding inventory tray.
- • A flat, rigid square plate assembly resting completely flush on the table.
- • Smooth tile tracks visible in the center interior with stud edges along the perimeter.
- • Aligning all plate seams directly over each other, causing the base to snap apart.
Build the Textured Side Walls
Erect the four side walls around the perimeter using reddish-brown, dark brown, and tan bricks to replicate the Minecraft oak wood pixel pattern. Leave one side open or framed with a low clearance arch to accommodate the pull-out drawer mechanism. Ensure the inner wall faces remain flat so internal moving parts do not catch on exposed studs.
- • Four-sided square enclosure with pixelated tan and brown color variations.
- • A rectangular open slot on one wall face for the sliding tray.
- • Placing studded bricks inside the cavity where moving parts need smooth clearance.
Assemble the Sliding Inventory Tray
Construct a flat rectangular slide tray sized to match the interior width of your base track. Surface the top of this tray with light bluish gray 1x1 and 2x2 tiles to represent the 2x2 Minecraft inventory crafting grid and single output slot. Attach a small 1x2 brown tile or plate on the front lip to act as a seamless pull-handle.
- • A compact, flat tray with light gray grid squares and a brown front faceplate.
- • The tray slides smoothly into the main table frame without jamming.
- • Making the tray too wide by one stud, preventing it from sliding into the chassis.
Assemble and Detail the Table Top
Build the top lid on a dedicated square plate matching the block dimensions. Arrange dark brown and tan tiles across the surface to create the iconic 3x3 crafting grid texture with corner tool accents. Tile the entire top surface so no open studs remain visible on the finished exterior.
- • Completely smooth top surface displaying a defined grid and pixelated wood pattern.
- • No exposed Lego studs visible on the top face.
- • Leaving loose tile corners that sit unevenly above adjacent pieces.
Final Integration and Function Check
Mount the detailed top panel onto the main wall assembly, securing it firmly on the corner studs. Insert the inventory tray into the front slot and test the slide action multiple times. Adjust any tight exterior tiles to ensure the block looks seamless when fully closed.
- • A solid, cubic Minecraft crafting table block that appears solid from the outside.
- • Smooth, effortless pull-out action revealing the hidden crafting grid.
- • Pressing the top panel down too hard into the internal track area, pinching the sliding drawer.
Credit: inspired by an original tutorial by Legocoolstudios 2 — watch the original on YouTube.
Don’t have everything?
- No Lego brick separator? Edge of an old credit card or careful fingernail leverage
- No Reddish-brown Lego tiles? Standard reddish-brown plates (will show studs instead of smooth wood)